Jax AA Fencing, LLC is your veteran-owned fence design and installation service. We use the finest materials to build durable fences. Our company provides fencing for commercial and residential properties, specializing in vinyl and aluminum.

Contact Info

Jax AA Fencing installs new fences for homes and businesses in St. Augustine, FL. We build wood, vinyl privacy, aluminum, and pool fencing, plus gates and commercial work, using US-made materials and hardware picked for coastal conditions. Bought a house with a fence that is already rusting apart at the fasteners? Our fence replacement page covers how we handle the teardown and haul-off. The company is veteran owned, licensed, and insured, and the owner spent 9 years in the Army, so straight answers come standard. Every estimate here in coastal St. Johns County is free and happens on site, where we can actually see your yard. Mention this page and take $250 off any job over $2,000.

[ BUILT FOR THE COAST ]

Why Fences Fail Faster in St. Augustine's Salt Air

Salt air is the quiet fence killer in St. Augustine, and how hard it hits depends on where your lot sits. Homes on Anastasia Island and out toward Vilano Beach catch wind-driven salt straight off the water. Lots facing the Matanzas River and the Intracoastal Waterway get a steadier, lighter dose that does the same work over a longer stretch of years. Go a few miles inland and the exposure drops, but it never gets to zero, and we have torn out plenty of fences that looked fine from the street while the metal holding them together was already gone.

The housing here asks for three different kinds of fence work. Historic homes near the downtown core call for fencing that respects the character of the Ancient City area, established neighborhoods want clean replacements that match the street, and the newer stucco builds on the west side come with HOA standards that spell out height, color, and material before you dig. We check property lines, St. Johns County permitting, and HOA rules up front, before you commit to anything, so the fence you pick is the fence that actually gets approved.

[ BUILT TO SPEC ]

Salt Takes the Hardware First, So We Spec the Metal First

A coastal fence almost always dies at its fasteners, not its boards. Screws and brackets on our jobs are stainless or hot-dipped galvanized, never electroplated zinc, which gives up in a couple of seasons in coastal St. Johns County. On lots closest to open water along SR-A1A we step up to 316 stainless, because the molybdenum in it handles airborne chloride far better than standard 304 does. Aluminum gets a powder coat laid over a pretreated surface, not sprayed onto bare metal, and we keep dissimilar metals separated so a fastener is not quietly eating the bracket it sits in. Hinges and latches are the parts that move, so they get sealed corrosion-rated bodies instead of bare springs that seize by the second summer.

[ MATERIALS ]

Which Fence Material Actually Survives Salt Air Near the Coast?

Aluminum leads our recommendations near the coast, and for a plain reason. Powder-coated aluminum fences shrug off the salt air that corrodes bare metal and cheap coatings, they meet pool barrier requirements, and they keep the view open if your yard backs up to water or marsh. With a limited lifetime manufacturer warranty on the material, it is a decision you make once.

Vinyl privacy fencing is the workhorse for newer subdivisions like Murabella. A vinyl fence never needs paint, ignores the humidity that swells and rots lesser materials, and comes in the neutral colors most west-side HOAs approve without a fight.

Wood still fits St. Augustine better than almost any city in Florida, especially around historic and older homes. We build wood fences with US-made lumber and coastal-minded hardware, because in this climate the fasteners usually fail long before the boards do.

Some properties call for more than a standard panel. Our premium fences cover custom designs and upgraded styles for homeowners who want the fence to match the house, not just surround it.

[ WHO WE SERVE ]

Fences for Homes and Businesses Throughout St. Johns County

Residential

Backyard privacy, pool enclosures, and pet fencing make up most of our residential work in St. Augustine. From established streets in St. Augustine Shores to newer builds out west, we handle the permit checks, the HOA packet, and even the shared-side math: if a fence line benefits your neighbor too, we can help you split the cost. St. Augustine is one stop on our route through the county, and the St. Johns County fence page covers the rest of the areas we serve.

Commercial

Businesses along the US-1 corridor call us for aluminum perimeter fencing, gates, and equipment enclosures that stay presentable in salt air instead of streaking rust down the pickets. We keep disruption short and schedules honest, and every job is run by a licensed and insured crew used to working around an open business.

[ HOW IT WORKS ]

Three Steps From First Handshake to Finished Fence

The estimate walk. Everything starts with a free on-site estimate, and during business hours we aim to get back to you within about 30 minutes. We walk the line with you, check the survey and property pins, flag any permit or HOA requirements, and give you a straight number before we leave. We bring samples too, and if you want to see the coating and hardware finishes we run near the water, our aluminum fencing page shows the spec side by side. No pressure and no hounding afterward; the quote stands while you think it over.

Install day. By the time the crew arrives the approvals are squared away and the line is marked out. Posts and rails go in ahead of the hardware, and then hinges, latches, and fasteners go on as a matched set in one coating spec, because mixing metals on a coastal line is what puts rust streaks down a fence in the first couple of seasons. Most St. Augustine installs finish in 1 to 2 days.

The walkthrough. We test every gate latch and swing, haul off the construction debris and your old fence, and walk the finished line with you before the trailer leaves. If spreading out payments helps, Wisetack financing is available with an average APR of 7 to 10 percent.

[ COMMON QUESTIONS ]

Real Questions From St. Augustine Homeowners

How much does a fence cost in St. Augustine FL?

Installed fence jobs in St. Augustine typically land around $41 to $51 per linear foot, depending on material, height, and how your yard sits. Aluminum, vinyl, and wood each price differently, which is why we quote from your actual property line, not a satellite photo. Estimates are free and on site, and we take $250 off any job over $2,000.

Do I need a permit for a fence in St. Augustine's historic district?

Yes, fences in St. Augustine generally require a city permit, and properties in the historic districts around Historic Downtown may also need review by the city's Historic Architectural Review Board before anything goes up. We check the permit and review requirements for your exact property before you commit to a design, and we handle the paperwork so the fence that gets built is the fence that got approved.

What fence material holds up to salt air in St. Augustine?

Powder-coated aluminum handles St. Augustine's salt air better than almost any other fencing material, which is why it leads our recommendations near the coast, with vinyl a close second for privacy fencing. Both carry a limited lifetime manufacturer warranty. We also use US-made materials and coastal-minded hardware across the board, because cheap fasteners here can rust through in a couple of summers.

What are the pool fence requirements in St. Augustine FL?

Florida's Residential Swimming Pool Safety Act requires a barrier at least 4 feet high around residential pools, with gates that self-close and self-latch and open away from the water. Most St. Augustine homeowners meet the code with aluminum pool fencing, which also happens to be the material that shrugs off salt air. We build to the code and confirm the details for your inspection before we set a single post.

How long does it take to install a fence in St. Augustine?

Most fence installs in St. Augustine finish in 1 to 2 days once the crew breaks ground. If your neighborhood needs HOA approval first, plan on installation starting about 2 to 3 weeks after the approval comes through. During business hours we aim to respond to new inquiries within about 30 minutes, so the whole process moves as fast as the paperwork allows.

Who handles HOA fence approval in Murabella?

We handle the full HOA process for Murabella and the other newer communities on St. Augustine's west side, including preparing and submitting the application ourselves. Every HOA has its own rules on height, color, and material, so we confirm what your board approves before you commit to a fence. Once approval lands, installation typically follows within 2 to 3 weeks.

Can I finance a new fence in St. Augustine?

Yes on both. Financing is available through Wisetack with an average APR of 7 to 10 percent, and we offer discounts for military members and first responders, which comes naturally to a company run by a 9-year Army veteran. We also take $250 off any job over $2,000. Call (904) 330-4829 weekdays and we will walk you through the numbers on site.

[ CUSTOMER REVIEWS ]

What Homeowners Say Once the Dust Settles

Get a Fence Built for Salt Air, Not Just Curb Appeal

Materials and hardware get chosen for the coast here, not just for looks. Shopping for a second place up the coast? Our Nocatee page covers that end of the county. Otherwise, browse our gallery to see recent work, check our service areas, or call (904) 330-4829 weekdays 8am to 4pm ET for a free on-site estimate. Straight answers, no pressure, and $250 off any job over $2,000.