Jax AA Fencing, LLC is your veteran-owned fence design and installation service. We use the finest materials to build durable fences. Our company provides fencing for commercial and residential properties, specializing in vinyl and aluminum.

Contact Info

Jax AA Fencing is a veteran owned fence contractor installing residential and commercial fences across Jacksonville and Northeast Florida. Wood, vinyl, aluminum, and premium builds, installed by the same crews that handle our full fence replacements. Licensed and insured, and every estimate is free and done on site.

[ WHY IT MATTERS ]

Installing a Fence Is Not Just Digging Holes

Anybody can dig a hole. The difference is what happens five years later. Posts that are not set correctly start leaning, gates stop latching, and panels drift out of line. That is why we take the time to get the layout, post depth, spacing, and alignment right on day one.

Florida conditions matter here. Sandy ground on many lots, heavy rain, and hurricane season all factor into how deep posts get set and how they are anchored. We build for the conditions your fence will actually live in.

[ QUALITY INSTALLATION ]

What Makes a Fence Last?

Mostly the parts you cannot see after installation day. Posts set deep enough for the fence height and the soil. Concrete poured properly instead of a hole backfilled with loose dirt. Drainage thought through so water does not sit against wood. Gates hung square so they still latch after a thousand swings. Layout matters too, because a fence that starts an inch off the line ends a foot off the line. And the material has to match the spot, since a material that suits a shaded back yard may not hold up as well in full sun or beside a retention pond. None of this is complicated. It just takes a crew that refuses to skip steps.

[ CHOOSING YOUR FENCE ]

Picking the Right Fence Material

Wood is still the first choice when privacy matters most. It gives you flexibility in height, style, and stain color while keeping the traditional backyard look, and it asks for the most maintenance in Florida weather.

Vinyl costs more upfront than wood, but it does not rot, warp, or need repainting, which makes it one of the lowest maintenance fences you can put in this climate.

Aluminum works well around pools, front yards, and commercial properties where you want security without blocking visibility, and it resists rust and salt air well, which matters closer to the coast.

Want something above standard? Look at our premium fences, and ask about composite, which needs very little upkeep.

[ WHO WE SERVE ]

Residential and Commercial

Residential

Common residential projects are back yards. Privacy from close-set neighbors, keeping kids and dogs in the yard, pool enclosures, and HOA approved streetscapes. If an HOA is involved, we help you get the approval before anything gets ordered.

Commercial

For a business the fence is about security, access control, and liability. We install perimeter and security fencing for offices, warehouses, and job sites where keeping people and equipment safe is the point.

[ OUR PROCESS ]

How the Installation Goes

Before we dig anything, we walk the property with you, confirm the line, get utilities located through 811, and sort out permit and HOA requirements. If a survey is needed, we tell you before the job starts, not after a dispute.

On install day, posts go in first and the concrete gets time to do its job before panels and gates are hung. The crew keeps you updated as the line goes up.

Before we leave, we walk the finished fence with you, test every gate, and haul off the debris. You should not be able to tell we were there, except for the fence.

[ COMMON QUESTIONS ]

Fence Installation FAQs

How long does fence installation take?

Most residential installs finish in 1 to 2 days once materials are on hand. Length, material, gates, and weather move the number, so you get a real timeline with your free on-site estimate.

Do I need a permit to install a fence in Jacksonville?

Often yes, and the requirements change between the city, the beach communities, and the surrounding counties. Height limits change too. We check what applies at your address and sort the process out before work starts.

Do I need a survey before installing a fence?

We highly recommend a physical survey before installing a fence. It is the only way to know exactly where the property line sits, and it prevents the worst outcome in fencing, which is tearing out a brand new fence because it sits on the wrong side of the line.

Can you install a fence on a slope?

Yes. Depending on the material and the grade, we either step the panels or rack them to follow the slope. We look at the grade during the on-site estimate and tell you which approach fits your yard.

Can you remove my old fence first?

Yes. Tear-out and haul-away can be part of the job. If most of the old fence is coming down anyway, look at our fence replacement service, which covers exactly that in one project.

Do you call 811 before digging?

Yes, always. Utility lines get located and flagged before a single post hole is dug. It is required in Florida and it protects your property and our crew.

Do you install pool fences?

Yes. Aluminum is a common choice around pools because it keeps visibility while securing the area, and it handles the wet environment. We also make sure the fence and gates meet the safety requirements that apply to pool enclosures at your address.

[ CUSTOMER REVIEWS ]

What Jacksonville Homeowners Say

Get a free fence installation estimate

Tell us what you are fencing and why. We will come out, walk the line, give you a real number, and leave you alone to think about it. See our work, check our service areas, see the Duval County page for neighborhood detail, or call (904) 330-4829.